LS3/5A CABINET FULL KIT. ALL PARTS REQUIRED TO MAKE 2 COMPLETE LS3/5A CABINETS. To BBC specification. Easy Assembly.
New CNC computer produced version available from end-June 2014
Pre-orders being taken now.
LS3/5a style cabinet FULL kit - all parts required to make 2 complete LS3/5a cabinets. CNC cut to production accuracy and made in Great Britain by our BBC LS3/5a cabinet makers to BBC Specification. Buying the complete kit saves 5%+ on total parts cost.
This LS3/5a complete cabinet kit contains the following parts:
1 pr. LS3/5a kit cabinets, 2 Falcon terminal sets, 1 set ( 4 sheets differing thickness as per BBC specification) LS3/5a Acoustic Damping Foam, black acoustically transparent grille cloth, 2m 6mm & 2m 9mm LS3/5a baffle sealing strip, Cabinet damping, 1m Velcro, 1m T27 felt strips to BBC specification and KEF B110 sealing strip (made especially for Falcon Acoustics by the original British suppliers to full BBC Specification), 2 LS3/5a bolt sets and 2m 079/.2 OFC cable.
The cabinet kit is designed and pre-drilled for new Falcon or second-user KEF B110 and KEF T27. Each section is CNC produced for total accuracy. Easy to assemble with CNC-cut rebated corners, does not require specialist assembly tools. All you will need is PVA glue, drill, Posidrive screw-driver and some masking tape. A staple gun is helpful. Made in 12mm and 9.5mm selected grade Baltic Birch ply with 5 layer birch ply grille. Lacquered front board. Beech battens all supplied, chamfered front batten edge sections for easy B110 mounting. All holes countersunk for nuts bolts and screws. Marked and drilled for LS3/5a FL6/23 PCB crossover mounting if required. Full instructions supplied. Designed for finishing with veneer or spray painting after final sanding/preparation.
These CNC-quality cabinet kits are only supplied in pairs; drive units and crossovers not supplied.