LS3/5a style cabinet FULL kit C/W CROSSOVERS - all parts required to make 2 complete LS3/5a cabinets. Precision cut and made in Great Britain to BBC Specification. Buying the complete kit saves 5% on total parts cost. Please select crossover type required from the dropdown menu ( normally supplied with Falcon 23aB type).
This LS3/5a complete cabinet kit contains the following parts:
1 pr. LS3/5a style cabinets, 2 Crossovers as selected, 2 Falcon terminal sets, 1 set ( 4 sheets differing thickness as per BBC specification) LS3/5a Acoustic Damping Foam, 0.5m black acoustically transparent grille cloth, 2m 6mm & 2m 9mm LS3/5a baffle sealing strip, Dedshete, 1m Velcro, 1m T27 felt strips to BBC specification and KEF B110 sealing strip (made especially for Falcon Acoustics by the original British suppliers to full BBC Specification), 2 LS3/5a bolt sets and 2m 079/.2 OFC cable.
The cabinet kit is designed and pre-drilled for KEF B110 and KEF T27. Each section is hand-finished by British craftsman. Easy to assemble with precision-cut rebated corners, does not require specialist assembly tools. All you will need is PVA glue, drill, Posidrive screw-driver and some masking tape. A staple gun is helpful. Made in 12mm and 9.5mm Baltic Birch ply with 5 layer birch ply grille. Beech battens all supplied, chamfered front batten edge sections for easy B110 mounting. All holes countersunk for nuts bolts and screws. Marked but not drilled for LS3/5a PCB crossover mounting if required ( no extra holes if you use Falcon networks). Full instructions supplied. Designed for finishing with veneer or spray painting after final sanding/preparation.
These quality cabinet kits are only supplied in pairs; drive units not supplied.
|Crossover type||101ID Tap Solen Caps Kit|