New CNC computer produced version now available
All parts as used in the Falcon BBC-licensed LS3/5a
LS3/5a FULL kit C/W Pr F B110 Woofers, Pr Falcon F T27 tweeters, 23aB Bi-Wire CROSSOVERS Assembled) -all parts required to make 2 complete LS3/5a cabinets. CNC cut to production accuracy and made in Great Britain by our BBC LS3/5a cabinet makers to BBC Specification.
Buying the complete kit saves 10%+ on total parts cost.
This LS3/5a complete cabinet kit contains the following parts:
1 pr. LS3/5a style cabinet kits, 1 Matched Pr Falcon F B110 Woofers & 1 Matched Pr Falcon F T27 Tweeters ( Designed by Malcolm Jones, the original KEF B110/T27 designer, made in the UK by Falcon), 2 23aB BiWire Crossovers fully assembled, T27 LS3/5a brass grilles, 2 Falcon terminal sets, 1 set ( 4 sheets differing thickness as per BBC specification) LS3/5a Acoustic Damping Foam, Black Acoustic cloth, 2m 6mm & 2m 9mm LS3/5a baffle sealing strip, Cabinet damping, 1m Velcro, 1m T27 felt strips to BBC specification and KEF B110 sealing strip (made especially for Falcon Acoustics by the original British suppliers to full BBC Specification), 2 LS3/5a bolt sets and 2m 079/.2 OFC cable.
The cabinet kit is designed and pre-drilled for new Falcon B110 and Falcon T27. Each section is CNC produced for total accuracy. Easy to assemble with CNC-cut rebated corners, does not require specialist assembly tools. All you will need is PVA glue, contact adhesive, drill, Posidrive screw-driver and some masking tape. A staple gun is helpful. Made in 12mm and 9.5mm selected grade Baltic Birch ply with 5 layer birch ply grille. Lacquered front board. Beech battens all supplied, chamfered front batten edge sections for easy B110 mounting. All holes countersunk for nuts bolts and screws. Marked and drilled for LS3/5a FL6/23 PCB crossover mounting if required. Full instructions supplied. Designed for finishing with veneer or spray painting after final sanding/preparation.
These CNC-quality cabinet kits are only supplied in pairs.