Audax HM210CO is a very high quality 21 cm 8.00" Woofer with a woven Carbon-Fibre cone combined with a natural rubber high-loss high-compliance surround. Very firm and tight bass reproduction and good smooth roll-off. The former is fibreglass reinforced Kapton, with an edge wound flat copper coil. 70W power handling, excellent sensitivity at 91 dB SPL.
A rigid diecast frame and vented pole piece complete this outstanding 2011 manufacture unit.
|Nominal Impedance||8 Ohm|
|Nominal Power RMS||70W|
|Vas ( l)||100 l|
|Nominal Free Air Resonance Fs||28 Hz|
|Sensitivity (2.83V/1m)||91 dB|
|Nominal Rdc||6.5 Ohm|